Відео

Why did you have to swap your single USB port and why weren’t you able to use the dual? I only ask so I know to not try and make the dual work 😂

شكرا لك لقد كان مفيدا لي 👍🏼

I recently did this swap and got all the correct parts from the junkyard and the rest from parts stores, but I lost my ebrake function? I hooked up the cable correctly to the handbrake cable and both calipers, but when I pull up on the handle, it doesnt engage the parking brake at all, or at least not enough to stop it. Any help is appreciated.

Been having camera for quite awhile and like it. Just suction cup sucks so I bought a rear view mirror adapter , no more finding dash cam on ground when entering car.

I am thinking about putting lowering springs on mine, but I am hesitant because I don’t want to mess up my alignment, did you have any uneven wear on your tires after putting the springs on? I know this is a old video but thanks for the information!

Thanks for doing this.

I’ve seen two different chain install on the phasers? I’ve seen one has the double link chain on the exhaust phaser and the single link on the intake phaser. I have also seen it vice-versa? Which is correct?

Mine only does this when going around average bends on the highway at highway speed also does it when i hit a rough patch in the road but if i drive without bend i never experienced any wheel vibration at any speed could this still be the rack. Mine is an 11

Internet won't connect. Keeps showing a exclamation mark inside the wifi picture.

I really wish you would’ve shown a before and after photo side-by-side to see the difference of how the truck looks

I know I am quite late to your video and the one bit of video I was looking for is to get the video cable from the headliner to the back of the radio not sure how to route it

Found this video because I’m thinking about doing my new fiestas brakes (I’m trying to build a budget n/a ~200hp track car) so obviously gonna need the extra braking power came here to ask if you would think the whole job would be relatively similar it’s also a ‘13 hatch

Clicked the link, but it wants me to log in? Any other place to find that intake tube?

Great informational video. Thanks

You can do the same with the lower arm as I have done don't need the upper one as can hit the shockers

Do you happen to know if hatchback and sedan seats are interchangeable? I'm working on making an outline for a sedan build and this is one of the things that's tripping me up, I'd like to put a set of ST seats in her

Where did you get the plate to screw on and remove????

Well i did this and my ports in the rear don't work with everything plugged in

My engine is malfunctioning 💀

Would this work for a crew cab or would the center console be too long?

Did you figure out how to get air to the rear. If not I did and I’d be happy to share how I did it

Does the 2015+ st bumper fit on a 2013 like I don’t have to cut parts or drill holes to make it fit ?

any updates for this?

Love the channel

Solid or hollow bar. On forum, some owners has it broken. Did steeda do new model?

Good mythical morning t shirt hell yeah. Im replacing my radiator core support on my 04 mustang thanks for the video.

Show us

Wait did I understand correctly? You had perfectly fine face lift beuty and you swaped it for the ugly 2013 looking front bumper? I want to do the oposite, with mine 2013. I love the look of facelift.

What size screws did you use for this 2.3L TB please cause they are longer than the 2.0L TB as I'm in the process of purchasing a TB for my Focus? Thanks for the knowledge man

May 08 2024 ... just an FYI ... I finally did a factory reset of my old radio, I figured if it messed everything up I'll just get a new one. Well it worked! The radio did a complete factory reset and everything worked as it did when it was new. All the buttons functioned as normal and it still is a radio lol. That said however I think I will order a newer unit, the original one will not do any updates anymore. My car is still mint and because of covid mileage is low. It deserves a new(er) radio ... again thank you for y our help .... really would like to see more videos as you have done in the past ... you both are very entertaining and knowledgeable 👍

Anyone know if that will work on a Ford cmax. What is the part number

Please show installing shock. Why does mine hit the arm. Ouch. May 6, 2024 Bill P

where did you find GL3Z-1504339-FC ? do you remember where you got it, having trouble finding one

Dude, you didn’t use the silicone washers for the rear brake light. It can leak through the screw holes.

Awesome video man! So comprehensive. Thanks for the help, just installed my center console

Biutiffull 👍👍

what was wrong with the original one?

So i didn't find your video until after i put my cam caps and timing in all in. I went 90 degrees not 45 accidentally . Will that hert anything you think?

awesome video now i have to track a center console down to put into my 2016

Think this is what I’ll do on my Lightning and remove my center seat

Got one installed on my car today question how do you set time and date

Bro thankyou for this amazing video , i never worked in cars but after watching your video i feel pretty comfy doing, i just need the pice to replace the shifter i don’t know where to find ! i definitely subscribe your chanel Thankyou Again.

Saludos desde San Carlos Costa Rica Pura Vida

Good afternoon Blessings question does the raptor 2014 have a trailer brake question can you install trailer assistant on the for f150 raptor 2014 or not

Is your garage 20x20? mine is and I am still collating how to install it, received mine yesterday and had things out of box and both columns up wheels and handles on. My garage if full of boxes and stuff UI do not have space to move them out , I made space for the max jax crate over the last week but stuff I moved out of the garage into the house already used all available house space I got so thinking really hard how to re-arrange everything, on the left looking to the street from the garage I have 2 feet from the wall to where the garage door rail runs but those 2 feet are used with shelves, on both sides now the columns I believe the one that goes on the left pretty much lines up its front with where the garage door rail runs, so the front of it would be around 2 feet from the wall then choosing how wide to set; I do have a Chrysler Town and Country which is our biggest vehicle and barely fits in the garage as the van is 16 feet long! so it will be tight to work on it with the garage door closed as I would have only like a foot and half of space in front of it, that is installing the columns half way of the length of the garage, but my other concern is when it raises, the mini van is pretty tall too and it may touch the garage motor light on the right as raising up? I have measure over and over and cant still figure out if I should install them columns center of garage or at 11 feet from the garage house door, leaving only 9 feet up to the garage door; to make matters better I also ordered and received a Mud Mixer for future slab work in the yard and the box is huge as well in a pallet and that I cant take out of the garage so have to make space for it as well by removing more boxes or items; everything was simpler years back when I lived in an apartment as none of this could have taken place but I would not trade it for a second! The slab is for a planned 16x12 shed/storage where all the crap would go and then garage would be usable as work space if not to park at least one car; we got a pretty big driveway 9 cars fit there fine so i have never seen the garage as needed to park a car unless I would own a very expensive car, in the family we got 4 cars but for now 2 of them need engine swap which is why I bought the lift, I did an 80% total rebuilt of a 2004 Toyota Corolla and that took me from first tear down to start again 3 1/2 years and many times I wished I had the lift, well now i do because I know better than to embark in another engine teardown without it, i think one job for oneself where saving shoulders and back pays for it loosely. Body parts are priceless!

info for the bracket? i dont see it?

Why would you want the older one?

Date March 13 - 2024 ... I have had this radio in my Focus for several years now... was inspired by your videos. The radio still works, however, some of the functions no longer work like the home button and the view what apps are open button. Also I can no longer download apps. It just goes into a pending loop and nothing happens. I have tried several methods to trouble shoot, but nothing works. My question is: have you done a complete Factory reset? On the Android level! and if so does the radio return to being a radio or is it just a tablet after the reset? I can't seem to find an answer on line. I have done the factory reset for the radio itself and it basically does nothing. Your help is greatly appreciated.

Would I be able to do 5 foot pounds since that is equivalent to 60 inch pounds?

Great video. What cheap torque wrench would work for this that I can get at harbor freight or some hardware store around here